
Before
The failure point
The door and frame area were damaged, affecting the way the entrance closed and secured.
Project details
After a break-in, the visible damage is only part of the problem. The frame, jamb, latch, lock area and closing line all determine whether the entrance can be secured again.

Before
The door and frame area were damaged, affecting the way the entrance closed and secured.
After
The damaged entry area was repaired so the door could close, latch and secure again.

Similar completed work
See how similar windows, doors, storefronts and exposed openings were handled.
Before
AfterA Toronto entry-door jamb was split around the latch and deadbolt strike areas. BoardUp rebuilt and reinforced the damaged section so the door could close and secure again.
View project →
Damage
RepairBreak-in damage split the wooden closing edge. The damaged section was rebuilt while the original glazed door remained in place.
View project →
Before
SecuredBroken entry-door glass left an Etobicoke entrance exposed. BoardUp secured the glass opening so the property remained protected until the correct replacement glass was ready.
View project →Project questions
These are the questions customers usually need answered when the damage looks similar.
The door, frame, latch and lock area need to be checked so the entrance can be secured again.
No. This service focuses on the door, frame, latch and locking system after forced entry. Broken door glass is handled separately when glass is also damaged.
Yes. The entrance can be stabilized or temporarily secured while the glass or door is repaired.
Similar damage?
We secure the opening first, then replace the glass or repair the damaged door or storefront.
+1 (437) 755-557524/7 emergency response across Toronto and the GTA.